Kjøretøy

The scope of CCC certification for motor vehicles shall be in accordance with the requirements of the Implementing Rules for vehicles of category M, N and O (including complete vehicles and non-integrated vehicles). The certification according to the general safety standards eg GB 7258 "technical requirements for the safe operation of motor vehicles", For specific product inspection articles, please refer to the implementation rules of CNCA-C11-01: 2014 Automotive Annex 1 Type Test Projects and Standards.

1, How long does it take from the application to the receipt of the certificate?

90 days are set by law for cetification. According to experience, these sometimes take longer.

* it could result in a delay in processing:

if application documents are not complete,

if there are problems with testing in the Test Lab,

if there is a deviation in the audit.

Source: CCAP-C11-01: 2014 / A1 page 4, item 6.2

2, How often does factory audit take place?

Plant is classified after the initial audit in A, B, C, D.

A: Factory audit takes place once every 2 years.

B or C: Factory audit takes place once a year.

D: Factory audit takes place at least twice a year.

Source: CCAP-C11-01: 2014 / A1 Page 2, Point 4.2, CCAP-C11-01: 2014 / A1 Page 13, Point 10.2

3, how many audit days are there at the Inital Audit or the FU Audit?

Initial Audit: up to 10 man day per model series, depending of subparts certified

FI audit: up to 6 man day per model series

Source: CCAP-C11-01: 2014 / A1 page 9, clause 9.2.1.2,

CCAP-C11-01: 2014 / A1 page 14, item 10.3.2

4, how is the audit conducted?

Factory audit is performed according to IR CNCA-C11-01 Appendix 5

- Responsibility of quality manager: Appointment letter and service description (creation of control documents, management of change, complaint, CCC mark, CCC certificate status, etc.)

-Technical documentation: management of technical documents, control plan, product standard, product description of existing / new products, etc.

-Overview control: control of property, model and supplier of core material and core components, etc.

- Checking product compliance: running tests, final tests, etc.

Review of production process compliance: review of product structure, material and component, conformity of core production process, etc.

Product Check: Requalification Test

Change control: control of change request, etc.

Control of serious quality problems: customer complaint, recall, etc.

Source: IR CNCA-C11-01 Appendix 5

5, which application documents should be submitted to the initial audit?

  1. Application form
  2. License in copy-Questionnaire inkludert kort informasjon om selskapet, produksjonsprosess, liste over kjerneproduksjonsanlegg, liste over kjernetestinstrumenter, bevis på registrert varemerke etc.
  3. Car structure and technical parameters
  4. COP control plan
  5. Declaration: how is type, series defined
  6. Declaration: how is VIN defined
  7. Explanation: we distinguish the different types by external marking
  8. Declaration: Operating instructions in Chinese
  9. COC certificate
  10. Review
  11. Quality Manual
  12. Quality system certificates in copy
  13. Etc.

Source: CCAP-C11-01: 2014 / A1 Page 22-23 Appendix 1

6, how is Unit (technical unit) defined?

Step 1: Group car first after series defined by manufacturer

Step 2: Units are removed from the same series

It can not be defined as a unit if:

- Car types are not the same (M1 - up to 9 seater, M2 - from 10 seats, M3, N1, N2, N3, O1, O2, O3, O4), see below 8.1.1, 8.1.2, 8.1.3.

- car series is not equal

- position of the engine is not equal (front, middle, rear)

- fuel is not equal (gasoline, diesel, gas, electricity, etc. Hybrid "gasoline + electric" is considered as same unit as gasoline engine, hybrid "diesel + electric" is considered as same unit as diesel engine)

- Drive is not equal (four-wheel, non-four-wheel)

- Sum of the axis is not equal

- Etc.

Within one unit:

- Vehicle outside dimension limit: 20%, longest <= shortest x 1.2

- Limit axle position, wheelbase: 15%, longest <= shortest x 1.15

- Limit parameters (total weight, distribution of front and rear axle): 20%

- Etc.

6.1 M1

Same design platform, structure from part before B pillar similar (sedan, station wagon, convertible with hardtop, convertible with folding roof, etc.)

Limit within one unit: Engine KW: 30%, Displacement: 20%

6.2 M2, M3, N1, N2, N3

Limit value for engine KW: 50%, engine capacity: 50%

Limit within one unit: total weight: 20%

Source: IR CNCA-C11-01 Appendix 2

7. Which tests are performed according to which GB standard?

See CCAP-C11-01: 2014 / A1 page 29-45

8, List of key component and materials:

See CCAP-C11-01: 2014 / A1 page 22-23 Appendix 1 page 24-27

CCC News

Geely setter opp teknisk FoU-senter i Tyskland Geely setter opp teknisk FoU-senter i Tyskland 2019-05-18 - Ifølge China News Service Beijing i mai 16 som ...
Implementeringsregler for Urban Rail Transit Equipments utgitt Implementeringsregler for Urban Rail Transit Equipments utgitt 2019-05-06 - Ifølge en nylig kunngjøring fra Kina sertifisering ...
forretningsområder av testlaboratorier for Kina CCC-produkter oppdatert forretningsområder av testlaboratorier for Kina CCC-produkter oppdatert 2019-04-29 - forretningsområder av utvalgte testlaboratorier for Kina CCC ...
21 nye og reviderte GB Standards released 21 nye og reviderte GB Standards released 2019-04-19 - Ifølge en nylig press fra statsrådet i Kina, ...
177 nye og reviderte GB Standards released 177 nye og reviderte GB Standards released 2019-04-04 - Ifølge en nylig press fra statsrådet i Kina, ...
Daimler vil investere 500 millioner euro for å produsere elbiler Daimler vil investere 500 millioner euro for å produsere elbiler 2019-03-24 - Daimler-konsernet vil investere 500 millioner euro (ca.
GB Standarder for Kina CCC bilprodukter oppdatert GB Standarder for Kina CCC bilprodukter oppdatert 2019-03-17 - Ifølge en nylig kunngjøring av CNCA (China National ...
Tesla Model 3 - Kina Markedsleveringsseremoni Tesla Model 3 - Kina Markedsleveringsseremoni 2019-03-15 - I januar 22, 2019, modell 3 China Market Delivery Ceremony ...
Motorkjøretøyet retroreflektorprodukt CCAP-merket sertifisering Motorkjøretøyet retroreflektorprodukt CCAP-merket sertifisering 2019-03-12 - For å gjennomføre ånden i Kina National Ce ...
detaljerte gjennomføringsregler for lyd og video utstyr revidert detaljerte gjennomføringsregler for lyd og video utstyr revidert 2019-03-10 - Kina Quality Certification Center (CQC) revidert forskriften ...

Støtte

Unterstützung

Du jobber i ditt tempo. Du kan håndtere prosjektene dine selvstendig via vår portal, samt spørre om personlig støtte. Vi har derfor forpliktet oss til å designe egne prosesser

Online administrasjon

Online administrasjon

Vi tilbyr deg muligheten til å utføre din egen sertifiseringsprosess, men uten å måtte forkaste kunnskapen eller støtten til erfarne medarbeidere. Nettbasert system er designet for en rekke sertifiseringer, og tilbyr deg ofte stillede lister, samt ferdige skjemaer og tabeller, samt en modul for å avklare åpne spørsmål med en av våre ansatte.

Endre sertifisering

Endre sertifisering

I vår raske tid er endringer i næringslivet et konstant akkompagnement. Det kan bli ødelagt veldig raskt. Det er interne og eksterne årsaker til dette. CS gir en oversikt over samsvaren under endringer.

Samarbeid

samarbeid

Vi har bare begrenset tid og økonomisk kapasitet, og ønsker å tilby en omfattende tjeneste, samarbeider gir bare mening blant beslektede organisasjoner. Disse har en pålitelig struktur, samt en god mellommenneskelig harmoni.

Gå til toppen